background image

3

Features

C

Features

3-35

C

harge Fee Reference

Description

Allows pre-assigned display telephone users to see charges and
print out the charges.  Charges are displayed per extension, CO line,
Account Code, or the total of each can be referred to.  There are
two display formats – Pulse or Pound.

Conditions

• System programming determines the extensions that can see charges.
• An identification code (ID code), set by system programming, is

required to see charges.

• The first display format – Pulse or Pound – is selected by system

programming.  This can be switched manually at each extension.

• Exchange rate between pulse counter and pounds is changeable by

station programming.

•  The displayed currency denomination can be programmed by system

programming.

Programming References

Section 4, System Programming, 

[015]  Charge Rate Fractional Point Assignment
[016]  Charge Rate Assignment
[117]  Charge Display Selection
[118]  Charge Fee Reference Extension Assignment
[119]  Charge Fee Reference ID Code Set
[125]  Assignment of Denomination

Station Programming.......................................................User Manual,
Charge Fee Reference

Feature References

None

Operation References

Station Programming,

—User Manual

Charge Fee Reference

Summary of Contents for KX-TD816E

























































































































































































































































































































































































































































































































































































































Reviews: