Panasonic KX-TD816E, Installation Manual, Page: 503 / 600

List 5-9
5.2 Default Values
Address Program Default
[7003] Itemized Code Set
[7X0Y] LCR Leading Digit Entry for Plans 1
through 8
[7X1Y] LCR Time and Fee Set for Plans 1
through 8
[7X20] LCR Exceptional Code Set
[7X21] LCR Carrier Code
[7X22] LCR Carrier Modify Command
[7X23] LCR CO Line Group Assignment
[7X24] Authorization Code Set
Resource Programming
[800] SMDR Incoming / Outgoing Call
Log Printout
[801] SMDR Format
[802] System Data Printout
[803] Music Source Use
[804] External Pager BGM
[805] External Pager Confirmation Tone
[806]–[807] EIA (RS-232C) Parameters –
Port 1/ Port 2
[813] Floating Number Assignment
[814] Modem Standard
Option Programming
[990] System Additional Information
[991] COS Additional Information
• KX-TD816
Jack 01-1 through 16-1=201 through 216
Jack 01-2 through 16-2=301 through 316
• KX-TD1232
Jack 01-1 through 64-1=201 through 264
Jack 01-2 through 64-2=301 through 364
Carrier 1–Table 1–Location 1=
Other Locations=Not Stored
Not Stored
Not Stored
Carrier 1=131; Other carriers=Not Stored
Carrier 1=CPTAIH; Other carriers=Not Stored
Carrier 1=12345678; Other carriers=Not
Stored
Not Stored
All Calls=Off
Page Length=66; Skip Perforation=0
Not Applicable
Hold and BGM=Music 1
All External Pagers=Disable
On
New Line Code=CR+LF; Baud Rate=9600;
Word Length=8; Parity Bit=Mark; Stop Bit=1
— Port1/Port2
• KX-TD816: Pager 1=296; Pager 2=297;
DTA=299; Hunting Groups 01 through 32
=Not Stored
• KX-TD1232: Pager 1=296; Pager 2=297;
Pager 3=396; Pager 4=397; MODEM=399;
DTA=299; Hunting Groups 01 through
32=Not Stored
CCITT
See pages 4-169 through 4-174.
See page 4-176.