manualshive.com logo in svg
background image

1

0

Congratulations!   You have pur-
chased one of the most sophisticated
cordless telephones on the market!
The VTech VT 1922  has been
designed to offer a new standard in
cordless telephone technology.

Unlike most other cordless phones,
the VTech VT 1922 digitizes your voice
using advanced ADPCM digital voice
coding to provide noise and distortion
free performance.  In most conditions
you will not be able to tell you are using
a cordless phone.  Gone are the
annoyances of static, interference and
having to listen to other people's
conversations on your cordless phone.

The VTech VT 1922 scrambles your
voice before it transmits it.  This allows
you the security of knowing that no one
can tune in and eavesdrop on your
conversations.

The VTech VT 1922 decodes and
displays name and/or number Caller
ID (CID) information where available
and when subscribed to.  The alpha-
numeric display can show both the
name and number of the calling party.
Up to 15 name characters or 11
phone number digits can be displayed
on the LCD.

With the VTech VT 1922, the user can
easily answer a call by pressing any key
other than the OFF, MUTE or VOLUME
Keys. In addition, the Handset display
illuminates when the phone rings.
This is very useful in a dark
environment.
The VTech VT 1922  also provides a
one-way Page/Find. Pressing the
base PAGE key will cause the handset
to  ring in a manner which
distinguishes it from normal incoming

INTRODUCTION

ringing.  This can be used to alert the
handset user, or to simply locate the
handset in the event that it is
misplaced.

The VTech VT 1922 uses special
memory in both the base and handset
which is not susceptible to power
failures.  This provides permanent
storage of all memory dial numbers,
CID information as well as the base
and handset security codes.

When an optional battery pack is
installed in the base unit, the VTech
VT 1922 uses this battery pack to
provide operational backup in case of
power failure.  In this way you have
access to all normal phone functions
during a total power outage.  Calls can
still be placed and received without
interruption.  More than 5 hours
backup will be possible with a fully
charged battery pack in the base unit.

The VTech VT 1922 informs you that
another  extension is currently in use
on the same phone line.  The phone
will also alert you when you are Out
of Range, even when you're not using
the phone!

Содержание vt1922






















Отзывы: