Panasonic KX-TD500, System Reference Manual

Page: 1357 / 1574

Operation Display/Indicator/Tone Comment/Note
13-C-45
1. Set Charge Management
Mode.
2. Enter “4”.
3. Enter account code location
number:001 through 200.
• To alternate between the rate
and the meter press SELECT.
To reset the meter:
4. Press CLEAR.
5. Press MEMORY to store the
data.
To check other account codes:
6. Press PREV.
or
Press NEXT.
To finish the programming:
7. Press END.
• Charge Meter
• Account Code ?
<Example>
001 : 00005
001 : 00001.15DM
<Example>
001 :
• The MEMORY indicator lights
red.
<Example>
001 : 00000
• SYS–PGM No?
Initial Display of PITS Station
Programming Mode
9.08 Checking/Clearing the
Charge Meter–Account Code
Used to check the charge meter of each account
code.
• Refer to Section 13-C-9.02
“Entering Charge
Management Mode”.
• You can press NEXT to enter
001.
If the account code is not
registered, “Not Stored” is
displayed.
• The value of rate is valid only
the last 7 or 8 figures. Refer
to Section 11-C-58.02
“Charge Rate (RAT)” for
further informations.
• Repeat steps 3 through 5.
• Repeat steps 4 and 5.
Conditions
• When an account code exceeds 5 digits, “ ” character is displayed at the end of an account code.
Press “ ” button to display remaining digits.