Panasonic KX-TD500, System Reference Manual

Page: 659 / 1574

Changing a night answer destination to an UNA
(Universal Night Answer)
1. Lift the handset.
2. Dial the feature number for
“Flexible Night Service” (Default :
65) and CO physical number,
*
and 1 for external pager 1 or
*
and 2 for external pager 2.
• You hear confirmation tone 1 or
2.
3. Replace the handset.
or
1.03 Switching of Day/Night Mode
Description
It is assignable to switch Day/Night mode either
automatically at pre-assigned time or manually
by the Operator 1 (Attendant Console or
Extension) at any time desired.
If Manual Switching mode is assigned, the
Operator 1 must dial the feature number for
“Night Mode Set” for night service or “Night Mode
Cancel” for day service.
If Auto Switching mode is assigned, the system
will switch the day and night modes at the
programmed time each day.
To utilize Auto Switching mode, set “System-
Operation (3/3)” Night Service to “Auto” and
assign desired mode switching time to “Auto
Start Time” on a per day of the week basis.
To utilize Manual Switching mode, set “System-
Operation (3/3)” Night Service to “Manual”.
The Operator 1, however, can override the Auto
Mode setting, that is Manual Mode is
established, by dialing the feature number for
“Night Service Manual Mode Set”. To restore the
Auto mode, the Operator 1 must dial the feature
number for “Night Service Manual Mode Cancel”.
If tenant service is employed, night service
assignment unique to each tenant (Tenant 1 and
Tenant 2) can be programmed individually.
In this case, the assignment in “System-
Operation (3/3)” is applied to Tenant 1 and the
assignment in “System-Tenant” is applied to
Tenant 2.
Programming
System Programming
Reference
VT Dumb
“System-Operation (3/3)”,
Night Service
Auto Start Time
“System-Tenant”,
Night Service (Tenant 2)
Auto Start Time
“System-Numbering Plan (8/11)”,
Night Mode Set
Night Mode Cancel
Night Service Manual Mode
Set
Night Service Manual Mode
Cancel
11-C-4.00
11-C-5.00
11-C-11.00
10-D-1.03
10-D-2.00
10-D-6.08
5-G-3