Panasonic KX-TD500, System Reference Manual

Page: 474 / 1574

6.00 Do Not Disturb (DND)
Description
Do Not Disturb allows an extension user to
appear busy to all incoming calls (extension and
outside calls).
To utilize this feature, assign “System-Class of
Service”, Call Forwarding/Do Not Disturb to “Yes”
beforehand by system programming.
This feature can be assigned and canceled either
by dialing the feature number or using the
FWD/DND button.
Programming
Conditions
(1) IRNA – Automatically
If a call via DISA/DID is directed to an
extension in the DND mode, it will be
automatically redirected to another extension
(including VPS extension) or an Attendant
Console assigned as the IRNA destination.
Refer to Section 3-F-5.00 “Intercept Routing
– No Answer (IRNA)” for further information.
(2) Making Calls
An extension in the DND mode can still be
used to make calls and access any other
features available to that extension.
(3) Answering Calls
An extension in the DND mode is available:
• To answer a call if its indication of arrival is
shown on his or her extension.
Refer to (Supplement 2) on page 4-D-14 for
further information.
• To answer a call ringing at another
extension by “Call Pickup” feature.
Refer to Section 4-D-3.00 “Call Pickup” for
further information.
System Programming
Reference
VT Dumb
“System-Class of Service (1/3)”,
Call Forwarding/Do Not
Disturb
“System-Numbering Plan (5/9)”,
Do Not Disturb Set
Call Forwarding/Do Not
Disturb Cancel
11-C-7.00
11-C-11.00
10-D-4.01
10-D-6.05
(4) FWD/DND
Setting DND feature cancels any Call
Forwarding feature pre-assigned on the
extension and vice versa.
Refer to Section 4-F-2.00 “Call Forwarding
(FWD)” for further information.
(5) BSS/OHCA
DND is effective for BSS/OHCA.
Refer to Section 4-C-5.03 and 4-C-5.04 for
further information.
(6) DND Override
“Do Not Disturb Override” allows extension
users to override “Do Not Disturb” feature
assigned on the called extension user.
Refer to Section 4-C-8.00 “Do Not Disturb
Override” for further information.
Operation
Assigning Do Not Disturb (1)
1. Lift the handset or press
the SP-PHONE button.
• You hear dial tone 1, 3, or 4.
2. Dial the feature number for “Do
Not Disturb Set (Default : **1)”.
You hear confirmation tone 1 or 2
and then dial tone 1, 3, or 4.
• If your PITS has a display, it
shows:
Do Not Disturb
3. Replace the handset or press the
SP-PHONE button.
• The FWD/DND indicator lights.
4-D-12