Panasonic KX-TD500, System Reference Manual

Page: 1353 / 1574

1. Set Charge Management
Mode.
2. Enter “0”.
3. Enter extension directory
number.
4. Press SELECT to check the
rate.
• To alternate between the rate
and the meter press SELECT.
To reset the meter:
5. Press CLEAR.
6. Press MEMORY to store the
data.
To check/clear another
extension:
7. Press PREV.
or
Press NEXT.
To finish the programming:
8. Press END.
Operation Display/Indicator/Tone Comment/Note
13-C-41
• Charge Meter
• EXT No.?
<Example>
100: 0000
<Example>
100: 00005
100: 00001.15DM
<Example>
100: 00000
• The MEMORY indicator lights
red.
• EXT No.?
• The meter of the next
extension directory number is
displayed.
<Example>
101: 00008
• SYS–PGM No?
Initial Display of PITS Station
Programming Mode.
9.04 Checking/Clearing the
Charge Meter–Extensions
Used to check and clear the charge meter of
each extension.
DN100
• Refer to Section 13-C-9.02
“Entering Charge Management
Mode”.
• You can press NEXT to go to
the lowest directory number.
• The value of rate is valid only
the last 7 or 8 figures. Refer to
Section 11-C-58.02 “Charge
Rate (RAT)” for further
informations.
• Repeat steps 3 through 6.
• Repeat steps 4 through 6.