Panasonic KX-TD500, System Reference Manual

Page: 1111 / 1574

10-K-3
Probable Cause
Extension assigned to NEXT HUNT STATION is
already assigned to NEXT HUNT STATION for
another extension.
Relation between tenant and Pickup group
assigned for an extension is incorrect.
As PRV-CO is assigned by PITS button
assignment, impossible to change the type of
the trunk group to any other than PRV.
As assigned to Single CO by PITS button
assignment, impossible to change the 1:1
destination of the line to a different PITS.
Attempting to change the tenant of Trunk group
without canceling the setting of 1:1 destination.
UCD group is not assigned.
Attempting to assign illegal Trunk Group type.
Attempting to assign the ATT which is not
registered as the operator to the maintenance
device.
Specified CO line does not exist.
Specified CO line is not the PVL.
Specified CO line is already assigned as a DIL
1:1 or PRV-CO by another extension.
Impossible to assign because the programmings
for specified CO does not satisfy the condition.
Impossible to assign because the programmings
for specified CO does not satisfy the condition.
Specified External Pager is not existing.
Attempting to delete the extension which is
registered as an operator of the tenant.
Attempting to delete the extension which is
registered as the destination of intercept routing
for the Trunk group.
Attempting to delete the extension which is
registered as an ATT busy out extension of
Trunk group.
Countermeasure
Assign another extension or clear the
previous assignment.
Make them in proper relation.
Cancel the assignment of the PITS button.
Cancel the assignment of the PITS button.
Change the tenant after clearing all 1:1
destinations of CO lines belonging to the
group.
Assign Pickup group to a UCD group.
Assign a correct Trunk Group type or change
that after clearing all CO lines belonging to
the group.
Register the ATT as an operator, or specify
another device.
Specify proper CO line.
Specify proper CO line.
Specify another CO line or cancel the
assignment of the desired line.
Change call placing type to 1:1, or change
group type to unique type.
Change call placing type to 1:N, and group
type to group.
Specify an existing pager.
Cancel the assignment as an operator.
Cancel the assignment as the destination.
Cancel the assignment as an ATT busy out
extension.
Error Message No.
052
053
054
055
056
057
058
070
080
081
082
083
084
090
101
102
103