Panasonic KX-TD500, System Reference Manual

Page: 1233 / 1574

11-C-107
Input Value
X(1 or 2)
1 : Internal Clock
2 : External Clock
(Default=1)
56.02 System Clock Mode (CLK)
Description
CLK command determines which TSW clock mode is used, internal clock or external clock.
• Internal Clock mode ....... TSW clock within the system is used.
• External Clock mode ...... TSW clock provided by T-1/E-1 trunks is used. When the external clock
has trouble and is not working properly, internal clock starts to work
automatically.
(Password level : Two or higher)
Input Format
Index Number
None
Item Number Input Values
Assigning Item
TSW clock mode
C L K Mode (SH/AT/BT) Item Number (1)
CR
↵
Note :
"TSW clock mode" can be changed only when all T-1 cards status are "OUS" or "FAULT".
Programming
To change the default setting
1. At the programming prompt (PRG>), enter 'CLK AT 1'.
➔
; PRG> CLK AT 1 (
↵
)
The screen displays the current value and the input prompt (INPUT >>) as follows:
➔
; 1: Clock Mode ............................ 1
; INPUT >>
2. Enter the new value.
➔
; INPUT >> 2 (
↵
)
3. To store the new assignment, enter '$EOD' on the next line.
➔
; 1: Clock Mode ........................... 2
;
INPUT >> $EOD
The new assignment is stored to the system, and the programming prompt (PRG) appears again.