Panasonic KX-TD500, System Reference Manual

Page: 489 / 1574

Operation
Executing Call Park-Station
During a conversation on the DN or CO button
1. Press the TRANSFER button,
then dial the feature number for
“Call Park-Station” (Default :
Y
48), or press only the “Call
Park-Station” button.
If you use the TRANSFER
button and the feature number:
• When you succeed in Call
Park-Station, you hear
confirmation tone 2, then dial
tone 1, 3, or 4.
• When you fail, you hear busy
tone 1 or 2.
If you use the Call Park-Station
button :
1) During a conversation on the CO
button,
• When you succeed in Call
Park-Station, you hear
confirmation tone 2, then no
tone.
• When you fail, you remain in
conversation status (pressing
the Call Park-Station button is
ignored).
2) During a conversation on the DN
button,
• When you succeed, you hear
confirmation tone 2, then dial
tone 1, 3, or 4.
• When you fail, you remain in
conversation (pressing the Call
Park-Station button is ignored).
• If your PITS has a display, it
shows:
Call Prked at ST
• If you fail in Call Park-Station
(another call is already
parked), you hear busy tone 1
or 2.
• If your PITS has a display, it
shows:
Park at ST N/A
• To talk to the other party placed
on Consultation Hold while
hearing busy tone 1 or 2, follow
the procedure identical to
retrieving Consultation Hold.
Refer to Section 4-E-3.00
“Consultation Hold”.
2. Replace the handset or press the
SP-PHONE button.
Retrieving a call parked in the station parking
area
1. Lift the handset or press the SP-
PHONE button.
2. Dial the feature number for “Call
Park Retrieve-Station” (Default :
#48), or press the “Call Park-
Station” button which is assigned
to a CO/PF button.
3. Dial the extension number of the
parking extension : three or four
digits.
• When you succeed in retrieving
the parked call, you hear
confirmation tone 1. Then talk
to the other party.
• If no call is parked at the
extension, you hear reorder
tone.
• If your PITS has a display, it
shows:
No Hold Call
4-E-9