Panasonic KX-TD500, System Reference Manual

Page: 1234 / 1574

11-C-108
56.03 Master Clock Priority (CLP)
Description
CLP command is used to assign the sequence in which TSW clock is provided when multiple T-1/E-1
cards are installed.
(Password Level : Two or higher)
Input Format
Note:
You have to assign this item even if only one T-1/E-1 card is installed.
T-1 /E-1 card physical slot number
(three digits number)
Assigning Items Input Value
Priority 1 to 8
Item
Number
1 to 8
Index Number
None
Item Number Input Values
C L P Mode (SH/AT/BT)
Item Number
CR
↵
Programming
To enter the Dumb Programming mode
1. Press CTRL key and V key simultaneously when Main Menu screen is displayed at VT
programming mode.
2. At the Dumb programming initial prompt (; > ), enter 'PRG'.
➔
; > PRG (
↵
)
The screen displays the programming prompt (PRG>) as follows:
➔
; PRG>
To change the default setting
1. At the programming prompt (PRG>), enter 'CLP AT 1'.
➔
; PRG> CLP AT 1 (
↵
)
The screen displays the first value of the sequence, and input prompt (INPUT >>) as follows:
➔
; 1 : Priority 1 ................... 101
; INPUT >>
2. Enter the new value (e.g. 201).
➔
; INPUT >> 201 (
↵
)
The screen displays the next item and the input prompt (INPUT >>) as follows:
➔
; 2 : Priority 2 .................. 105
; INPUT >>