- 52 -
≥
You may see a band of light around an object that is shining very bright, or highly reflective.
≥
During normal playback, image movement may not look smooth.
≥
If you record an extremely bright object or record under indoor lighting, colour and screen
brightness may change or a horizontal line may appear on the screen. In such cases, change
settings as follows:
j
Set this unit to Intelligent Auto Mode.
j
Adjust the shutter speed to 1/50, 1/60 or 1/100.
j
Adjust the Synchro Scan setting
≥
In Auto Iris Mode or Auto
Gain Mode, the screen brightness may not change even if you adjust
the shutter speed. (
l
48
,
49
)
If you press the multi-function dial when the shutter speed is displayed as a decimal number, the
Synchro Scan setting will be displayed. You can fine-adjust the shutter speed by adjusting the
Synchro Scan setting.
1
Press the SHUTTER button
2
When the shutter is displayed as a decimal number (e.g.,
1/60.0), press the multi-function dial.
≥
The display on the screen will switch from [
SHUTTER] to
[
SYNCHRO], and the Synchro Scan setting will be displayed.
3
Adjust the Synchro Scan setting by rotating the multi-function dial.
≥
You can adjust the setting faster by rotating the multi-function dial while pushing and holding it.
≥
To minimise flickering and horizontal bands, look at the screen while adjusting the shutter speed.
4
Push the multi-function dial to set.
Shutter speed range for the Synchro Scan setting
The shutter speed range varies depending on the frame rate in [REC FORMAT]. (
l
139
)
* Except for when [REC FORMAT] is set to [C4K/24p 100M].
Making adjustments with Synchro Scan
Frame rates in [REC FORMAT]
Shutter speed
50p/50i
1/50.0 to 1/250.0
25p
1/25.0 to 1/250.0
60p/60i
1/60.0 to 1/249.8
30p
1/30.0 to 1/249.8
24p
*
1/24.0 to 1/249.8
[C4K/24p 100M]
1/24.0 to 1/250.0