Panasonic HC-X1000 Operating Instructions Manual Download Page 160

Page: 160 / 180

- 160 -

Touch screen operation, start and stop of recording can be confirmed with this sound.

2 Beeps for 4 times

When an error occurs. Check the sentence displayed on the screen. (

167

)

When about 5 minutes have passed without any operation, this unit automatically turns off to save
battery life.

≥

This unit will not automatically turn off even if the [ECONOMY (BATT)] is set to [ON] in following
cases:

When [USB MODE] (

161

) is set to [DEVICE] and this unit is connected to a PC or Blu-ray

disc recorder with a USB Connection Cable.

PRE-REC is used

During remote operation

When connected to AC adaptor about 15 minutes have passed without any operation, this unit
automatically turns off.

≥

This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in following
cases:

When [USB MODE] (

161

) is set to [DEVICE] and this unit is connected to a PC or Blu-ray

disc recorder with a USB Connection Cable.

PRE-REC is used

During remote operation

The menu settings, Wi-Fi settings or [CUSTOMISE SCENE] are reset to the default. (

132

)

*1 Settings for [REC MODE], [REC FORMAT], [MEDIA SELECT], [CLOCK SET],

[SYSTEM FREQ] and [LANGUAGE] will not be changed.

*2 The Wi-Fi password will also be deleted.

≥

Returning all settings to the default is not possible during Freeze Frame. (

)

[ALERT SOUND]

[OFF]/

(Volume low)/

(Volume high)

[ECONOMY (BATT)]

[ON]/[OFF]

[ECONOMY (AC)]

[ON]/[OFF]

[INITIAL SET]

[ALL]:

This is for initialising all menus.

[SCENE]:

This is for initialising the setting of customise scene.

[Wi-Fi]:

You can change the Wi-Fi setting back to the default condition.

[NO]:

This is for not performing initialization.

Summary of Contents for HC-X1000





















































































































































































Search results

Summary of Contents for HC-X1000

Reviews:

Brands by name

Popular brands

Panasonic HC-X1000, Operating Instructions Manual

Search results

Summary of Contents for HC-X1000

Reviews:

Brands by name

Popular brands