Panasonic HC-X1000 Page 68 Operating Instructions Manual Download

Page: 68 / 180

- 68 -

You can apply a variety of effects to the subject you touch.

∫

Setting an Area Mode effect

You can select the following menu items to set an effect to be applied when you touch the subject.

∫

Using Area Mode

≥

Register “Area Mode” to a USER button. (

)

≥

Switch to Manual Mode. (

)

Press the applicable USER button or touch the applicable USER button icon
on the recording screen.

≥

Area Mode will be enabled and

will be displayed.

Touch the recording screen.

≥

The area frame will be displayed on the part you have
touched. The effect of the selected menu item will be
applied.

To turn off Area Mode

(With a USER button)

Press the USER button

(With a USER button icon)

Touch and hold the recording screen to
display operation icons.

Touch the USER button icon.

To change the size of the area frame

You can rotate the multi-function dial to change the
size of the area frame.

≥

The area frame is available in three sizes.

Area Mode

: [CAMERA SETUP]

[AREA MODE]

desired setting

[INH]:

Does not apply any effects of Area Mode.

[FOCUS]:

Optimises the focus automatically for the subject you touch

[IRIS]:

Optimises the iris automatically for the subject you touch.

[Y GET]:

Displays the luminance level of the subject you touch.

[FOCUS/IRIS]:

Optimises the focus and iris automatically for the subject you touch.

[FOCUS/Y GET]:

Optimises the focus automatically for the subject you touch and
displays the luminance level of the subject.



Area frame

Summary of Contents for HC-X1000





















































































































































































Search results

Summary of Contents for HC-X1000

Reviews:

Related manuals for HC-X1000

Brands by name

Popular brands

Panasonic HC-X1000, Operating Instructions Manual

Search results

Summary of Contents for HC-X1000

Reviews:

Related manuals for HC-X1000

Brands by name

Popular brands