- 69 -
≥
Area Function is not possible in following cases:
j
In Intelligent Auto Mode
j
When a remote control (commercially-available) is connected (
l
6
)
≥
When using Area Mode, even if you turn on Marker by pressing the ZEBRA button, the luminance
display frame will not be displayed. (
l
74
)
In addition, the luminance level will not be displayed if [AREA MODE] is set to [FOCUS], [IRIS] or
[FOCUS/IRIS].
≥
Register “Focus Transition” to a USER button. (
l
61
)
≥
Switch to Manual Mode. (
l
34
)
With Focus Transition, you can move the current focus position to a pre-registered focus position.
(
l
43
)
≥
Register “Capture” to a USER button. (
l
61
)
You can record still pictures or create still pictures from recorded motion pictures. (
l
32
,
85
)
≥
Register “Wi-Fi” to a USER button. (
l
61
)
You can use the Wi-Fi function. (
l
111
)
≥
Register “Infrared light” to a USER button. (
l
61
)
≥
Switch to Manual Mode. (
l
34
)
You can turn on/off the infrared light when [INFRARED REC] (
l
146
) is set to [ON].
Focus Transition
Capture
Wi-Fi
Infrared light
