- 2 -
∫
About the recording method
for recording motion pictures
This unit can record motion pictures using four
different recording methods, including MOV
(LPCM), MP4 (LPCM), MP4 and AVCHD
*1
.
(
l
31
,
139
)
*1 AVCHD Progressive (1080/50p, 1080/
60p) supported.
MOV (LPCM)
*2
, MP4 (LPCM)
*2, 3
:
This recording method is suitable for editing
images. Audio is recorded in linear PCM.
MP4
*2, 3
:
This recording method is suitable for playback
and editing on a PC. Audio is recorded in AAC.
*2 Those methods are not compatible with
motion pictures recorded in AVCHD
format.
*3 Those methods can record motion
pictures in formats that support 4K. 4K
motion pictures offer a resolution four
times higher than that of full high-
definition motion pictures.
AVCHD:
This recording method is suitable for playback
on a high-definition TV or storage on a disc.
Audio is recorded in Dolby
®
Digital.
∫
Regarding system frequencies
The NTSC/PAL standard setting of this unit can
be switched in [SYSTEM FREQ]. (
l
159
)
≥
To use this unit in regions where the TV
broadcasting system is NTSC, set it to
[59.94Hz(NTSC)]. To use this unit in regions
where the TV broadcasting system is PAL,
set it to [50Hz(PAL)]. (Playback is not
possible on TVs and other devices with a
standard that differs from the system
frequency setting of this unit.)
≥
You cannot store AVCHD scenes recorded
with different system frequencies on the
same SD card. If you have switched the
system frequency, use another SD card.
∫
Indemnity about recorded
content
Panasonic does not accept any responsibility
for damages directly or indirectly due to any
type of problems that result in loss of recording
or edited content, and does not guarantee any
content if recording or editing does not work
properly. Likewise, the above also applies in a
case where any type of repair is made to the
unit.
∫
About Condensation
(When the lens, the viewfinder
or LCD Monitor is fogged up)
Condensation occurs when there is a change in
temperature or humidity, such as when the unit
is taken from outside or a cold room to a warm
room. Please be careful, as it may cause the
lens, the viewfinder or LCD monitor to become
soiled, moldy, or damaged.
When taking the unit to a place which has a
different temperature, if the unit is accustomed
to the room temperature of the destination for
about one hour, condensation can be
prevented. (When the difference in temperature
is severe, place the unit in a plastic bag or the
like, remove air from the bag, and seal the bag.)
When condensation has occurred, remove the
battery and/or the AC adaptor and leave the
unit like that for about one hour. When the unit
becomes accustomed to the surrounding
temperature, fogginess will disappear naturally.
Read this first
