Panasonic HC-X1000 Operating Instructions Manual Download

Page: 48 / 180

- 48 -

When recording a scene that is too dark (or bright) or a scene in a similar situation, manually adjust
the iris and gain.

Iris adjustment

≥

Switch to Manual Mode. (

)

Press the IRIS button to switch to Manual Iris Mode.

≥

disappears.

Adjust the iris by rotating the iris ring.

Iris value:
CLOSE

(F11 to F1.9)

OPEN

≥

Value closer to CLOSE darken the image.

≥

Value closer to OPEN brighten the image.

≥

To return to Auto Iris Mode, press the IRIS button or set this unit to Intelligent Auto Mode using
the iA/MANU switch.

≥

Depending on the zoom magnification, there are iris values that are not displayed.

≥

In Auto Gain Mode or Auto Shutter Mode, the screen brightness may not change even if you
adjust the iris. (

)

Recording

Iris/Gain adjustment

IRIS





MNL

F4.0





Iris value

Auto iris icon

* It is displayed in Auto Iris Mode.

IRIS button

Iris ring

Summary of Contents for HC-X1000





















































































































































































Search results

Summary of Contents for HC-X1000

Reviews:

Related manuals for HC-X1000

Brands by name

Popular brands

Panasonic HC-X1000, Operating Instructions Manual

Search results

Summary of Contents for HC-X1000

Reviews:

Related manuals for HC-X1000

Brands by name

Popular brands