- 40 -
∫
To emphasise the outline of images
Setting [EVF/LCD DETAIL] to [ON] helps you achieve focus easier by emphasizing the outlines of
an image displayed on the LCD monitor and viewfinder.
You can also adjust the emphasis level or change the frequency.
≥
You can also enable or disable this function with the applicable USER button. (
l
61
)
≥
These settings will not affect the images actually recorded.
Adjusting the level of [EVF/LCD DETAIL]
1
Select the menu.
2
Touch
/
to adjust settings.
3
Touch [ENTER].
≥
Touch [EXIT] to exit the menu screen.
Setting the peaking frequency of [EVF/LCD DETAIL]
≥
[EVF/LCD DETAIL] is cancelled in following cases:
j
If you use Focus Assist (
l
40
)
Push AF
When using Manual Focus, you can temporarily use Auto Focus by pressing the PUSH AF button.
1
Set this unit to Manual Focus. (
l
39
)
2
Press and hold the PUSH AF button.
≥
The focus position will be automatically adjusted for the subject at the centre of the screen.
≥
If you set [AREA MODE] to [FOCUS], [FOCUS/IRIS] or [FOCUS/Y GET] and use Area Mode, the
focus position will be automatically adjusted to the subject you have touched. (
l
68
)
≥
It will be cancelled when the button is released.
≥
The focus position set by the Push AF will be maintained when cancelled.
≥
Push AF does not work in following cases:
j
In Intelligent Auto Mode
j
When the FOCUS A/M/
¶
switch is set to [A]
j
When a remote control (commercially-available) is connected (
l
6
)
Focus Assist
You can use Focus Assist by registering [FOCUS ASSIST] to a USER button.
≥
This function is registered to the USER5 button by default.
≥
Please refer to page
61
for details about setting the USER button.
: [DISP SETUP]
#
[EVF/LCD DETAIL]
#
[ON]
: [DISP SETUP]
#
[EVF/LCD PEAK LEVEL]
: [DISP SETUP]
#
[EVF/LCD PEAK FREQ.]
#
[HIGH] or [LOW]
MENU
MENU
MENU
