Panasonic HC-X1000 Operating Instructions Manual Download

Page: 22 / 180

- 22 -

Set the power switch to ON while pressing the lock release button

to turn on

the unit.

The status indicator lights on.

≥

To turn on the unit again after the [ECONOMY (BATT)] or [ECONOMY (AC)] is activated, set the
power switch to OFF once, and then to ON again. (

160

)

Press the THUMBNAIL button to change the mode to Recording Mode or
Playback Mode.

≥

When you turn on this unit, it starts up in Recording Mode.

≥

If you press the recording start/stop button or sub recording start/stop button in Playback Mode,
the mode will be switched to Recording Mode and recording will start.

Preparation

Turning the unit on/off

Preparation

Selecting a mode

Recording Mode (

)

The recording screen is displayed. You can record motion
pictures and still pictures.

Playback Mode (

)

The thumbnail screen for playback is displayed. You can play
back motion pictures and still pictures.

OFF





To turn off the unit

Set the power switch to OFF while
pressing the lock release button.
The status indicator goes off.



THUMBNAIL button

Summary of Contents for HC-X1000





















































































































































































Search results

Summary of Contents for HC-X1000

Reviews:

Related manuals for HC-X1000

Brands by name

Popular brands

Panasonic HC-X1000, Operating Instructions Manual

Search results

Summary of Contents for HC-X1000

Reviews:

Related manuals for HC-X1000

Brands by name

Popular brands