Panasonic HC-X1000 Operating Instructions Manual Download

Page: 151 / 180

- 151 -

Switch setting

All default settings are indicated with underlined text.

Sets the rotation direction and iris control of the iris ring.

Sets the function to assign to the USER buttons. (

)

Enable/disable of the sub recording start/stop button on the handle can be switched.

Enable/disable of the sub zoom lever on the handle can be switched. Zoom speed will be different
depending on the setting.

: [SW SETUP]

desired setting

[IRIS RING]

[DOWN OPEN]:

Iris will open when it is turned toward B.

[UP OPEN]:

Iris will open when it is turned toward A.

Iris ring

[USER BUTTON SETUP]

[SUB REC BUTTON]

[ON]:

The sub recording start/stop button is enabled.

[OFF]:

The sub recording start/stop button is disabled.

[SUB ZOOM]

[OFF]:

Sub zoom lever is disabled.

[LOW]:

Sub zoom lever is enabled. (Zoom speed: Slow)

[MID]:

Sub zoom lever is enabled. (Zoom speed: Standard)

[HIGH]:

Sub zoom lever is enabled. (Zoom speed: Fast)



Summary of Contents for HC-X1000





















































































































































































Search results

Summary of Contents for HC-X1000

Reviews:

Related manuals for HC-X1000

Brands by name

Popular brands

Panasonic HC-X1000, Operating Instructions Manual

Search results

Summary of Contents for HC-X1000

Reviews:

Related manuals for HC-X1000

Brands by name

Popular brands