6-26
Location
Shipping material/Procedure
Check
1
(1) Remove the copier rear cover.
(7 screws)
2
(1) Remove the hard disk mounting
bracket. (right) (2 screws)
3
(1) Install the printer hard disk
drive.(4 screws)
4
(1) Connect the IDE signal harnesses
to the IDE connector on the hard
disk drive and the printer control
PCB.
(2) Connect the power supply har-
ness to the hard disk drive.
(3) Reinstall the hard disk drive
mounting bracket (right).
(4) Reinstall the rear cover.
(2) Installation procedure
Remove all shipping materials before installation.
Caution: Make sure the copier is unplugged before the installation.
1
2
1
1
3