![background image](http://html2.mh-extra.com/html/panasonic/fp-d250/fp-d250_user-manual_3589824533.webp)
6-7
Unpacking/
Installation
Location
Shipping material/Procedure
Check
9
10
Hopper
Toner
bottle
Paper guides
(front/rear)
Toner bottle insertion
(1) Open the front door.
(2) Take a fresh bottle of toner and
shake it 10 to 15 times.
(3) Swing the toner bottle hopper open
90 degrees.
(4) Remove the toner bottle cap.
(5) Insert the toner bottle into the
hopper unit and turn it clockwise
until the arrows on the bottle and
the hopper are aligned.
(6) Close the front door.
Paper guide (left)
Paper size setting
(1) Pull the paper drawer out until it
stops.
(2) Position the paper guides (front/
rear) to the paper size required. If
the size will remain fixed, install the
screws to lock down the paper
guides.
(3) Position the paper guide (left) to
the paper size required and install
the paper guide screw.
(4) Position the paper size indicator so
that the proper size is displayed.
(5) Push in the paper tray.
(6) Select
F5-14
. (copier upper tray)
(7) Select the desired paper size.
(8) Press the “User Preset” and
"Clear" key simultaneously to exit
the F mode.
Note: Repeat (1)~(5) for the setting of
other trays.
F5-15
: Copier lower tray.