6-11
Unpacking/
Installation
Location
Shipping material/Procedure
Check
2
Side to side adjustment
1. Sheet bypass tray
(1) L o o s e n a d j u s t i n g s c r e w s .
(2 screws)
(2) Move the adjusting plate to the
front or rear accordingly.
2. 550 sheet paper drawer
(1) Pull the paper drawer out until it
stops.
(2) Loosen the four screws of the front
cover.
(3) Move the front cover as required,
then tighten the screws.
Note: I n s u r e t h e f r o n t c o v e r i s
adjusted evenly.
Screw
Sheet by-pass tray
