![background image](http://html2.mh-extra.com/html/panasonic/fp-d250/fp-d250_user-manual_3589824085.webp)
3-12
1
Sheet bypass paper
transfer roller
2
Sheet bypass paper
feed roller
3
Registration roller
4
Middle roller
5
Paper feed roller
6
Pick up roller
7
Cleaning sheet
Brush / IPA
8
Corona wire
9
Corona grid / Corona
case
10
Lower developer frame
Dust cover
11
Transport belt
12
Transfer corona wire /
Corona case/
Transfer guide plate
13
Fuser guide plate
Cloth
14
Fuser thermister
Cloth
15
Fuser separation finger Cloth
(upper/lower)
16
Fuser heat roller /
Cloth
pressure roller
Cloth with
water / IPA
Cloth with
water
Brush /
Vacuum
cleaner /
Cloth with
water
Cloth with
water
- Use damp cloth.
- Remove toner dust on separation
fingers.
- Don’t damage separation finger
edges.
Cleaning position
Tool/solvent
Work/precaution
Developer unit
Fuser unit
Paper feed unit
(to be continued)
- Use IPA, if toner is stuck on the
rollers. (use sparingly)
- Do not use cotton for cleaning
- Remove paper dust by brushing
it.
- If not replaced at PM cycle, high
voltage leak may occur.
- Insure that the wire does not sag and
is not kinked.
- Do not use cotton for cleaning.
- Lift the developer unit (mag-roll
side) up 45°, and rotate mag-roller
knob 4~5 times counterclockwise.
Remove the toner dust on lower
developer frame by brush or
vacuum cleaner.
- Clean the lower developer frame
with cloth.
- Use IPA, if the rollers are very
dirty.
http://getMANUAL.com