Panasonic Foma p705im, Instruction Manual

Page: 400 / 554

39 8
P
C
Co
nne
ct
io
n
The following hardware and software programs are required besides
the FOMA phone and personal computer:
≥
FOMA USB Cable with Charge Function 01 (option) or FOMA USB Cable (option)
≥
Provided “FOMA P705i μ /PROSOLID μ CD-ROM”
The following two ways are available for connecting the FOMA phone to
another device:
Connect the FOMA phone to a personal computer provided with the USB port
using the FOMA USB Cable with Charge Function 01 (option).
This way of connection applies to all types of communications such as packet
communication, 64K data communication, and data transfer.
≥
Set “USB mode setting” to “Communication mode”. (See page 302)
≥
You need to install the “FOMA communication setup files” (driver) before use.
By using infrared rays, you can send/receive data between your FOMA phone
and another FOMA phone, mobile phone, or personal computer provided with
the infrared data exchange function. (See page 307)
This applies only to data transfer.
Necessary Devices
Information
≥
Use a dedicated “FOMA USB Cable with Charge Function 01” or “FOMA USB
Cable”. The USB cable for personal computers cannot be used because the
shape of the connector differs.
≥
In this manual, operations are described for the case of using FOMA USB Cable
with Charge Function 01.
≥
If you use a USB hub, the devices may not work correctly.
Connect FOMA Phone to Other Devices
Use FOMA USB Cable with Charge Function 01
Use Infrared Data Exchange
The following outline shows a preparation flow to use the DoCoMo
keitai datalink by connecting the FOMA phone to a personal computer.
Preparation Flow for Data Transfer (OBEX)
Download or install the FOMA communication setup files.
・ Install the FOMA communication setup files from the provided CD-ROM.
or
・
Download the FOMA communication setup files from the DoCoMo web page
and install.
Data transfer