Panasonic Foma p705im, Instruction Manual

Page: 461 / 554

459
App
end
ix/Extern
al Devi
ces
/T
roub
le
sho
o
ti
ng
When downloading takes time or the server is busy, you can set in
advance the date and time for starting the software update by
communicating with the server.
1
Select “Reserve” from the Software Update display.
The date and time which can be reserved are displayed.
≥
The server ’ s time table appears for the software update reservation.
When you select “Others”
After communicating with the server, you can select the date and time you
want. The availability of each time zone is displayed on the time selection
display as follows:
○ : Available, △ : Almost full, × : Not available
When you select one time zone you want, you can communicate with the
server again to display candidates for reserving time.
2
Confirm the date and time you selected. Select “YES”.
Your FOMA phone communicates with the server
again and then the reservation is completed.
Reserve Date and Time for Updating Software (Reserve Update)
The display on the right appears and about five seconds
later the software update starts automatically.
Before the reserved time, fully charge the battery pack,
place the FOMA phone with the Stand-by display shown in a
place within reach of radio wave.
Select “Software update” from the setting menu, then enter your
Terminal Security Code and select “Update”; then you can confirm the
reserved time.
You can change or cancel the reserved date and time from
the display for checking reservation. To change, select
“Change”. To cancel, select “Cancel”.
If you select “NO” or “Cancel” from each display, the display for
ending the operation appears.
Select “YES”; then the software update ends and the Stand-by display returns. To
return to the previous display, select “NO”.
When the reserved time comes
Information
≥
Note that updating may not start even when the reserved time arrives if you are
using another function.
≥
The software update may not be started if an alarm is activated.
≥
If you execute “Initialize” on page 364 after completing the reservation, the
software update does not start even when the reserved time arrives. Make a
reservation for the software update again.
Check, Change, or Cancel the Reserved Date and Time
End Software Update
Information
≥
If the battery level points “ ” during operation, the software rewriting is not done
and the operation ends.