Panasonic Foma p705im, Instruction Manual

Page: 533 / 554

40
Perform the operation on page 4 to connect the FOMA
phone to your personal computer.
1
“ [
スタート
(Start)]”
1
Open “
接続先
(Access point)”, select an
access point and click “
接続
(Connect)”.
≥
Open the FOMA connection shortcut icon created at
communication setting; the connection display for starting
communication appears. Bring up the icon by the following
operations if it is not displayed:
“ [スタート (Start)]” → “ コントロールパネル (Control panel)”
→ “ ネットワークとインターネット (Network and Internet)”
→
“
ネットワークと共有センター
(Network and sharing center)”
→ “ ネットワーク接続の管理 (Management of network connection)”
2
Enter “ ユーザー名 (User name)” and “ パスワー
ド (Password)”, then click “ ダイヤル (Dial)”.
≥
For “mopera U” or “mopera”, you can connect even if the “ ユーザー
名 (User name)” and “ パスワード (Password)” fields are blank.
≥
When you put a check mark for “ 次のユーザーが接続するとき使用す
るために、このユーザー名とパスワードを保存する
(Save this user
name and the password for the next user to use for connecting)”, this
user or all users do not need to enter them from the next time.
3
Check for the connection, then click “ 閉じる
(Close)”.
≥
You can start the browser software to browse web pages, use
e-mail, and so on.
Carrying Out Set Communication
1
“ [ スタート (Start)]”
1
Open “ 接続先 (Access point)”.
2
Select the icon which is communicating, then
click “ 切断 (Disconnect)”
1
Click “ 閉じる (Close)”.
Before uninstalling the “FOMA PC setup software”,
reset the contents modified for the FOMA phone to the
default.
1
Exit the currently running programs.
≥
Click “ 終了 (Exit)” at the bottom right to exit the “FOMA PC setup
software”.
≥
If you try to uninstall during running of the “FOMA PC setup
software”, the display below appears. Stop the uninstallation
processing, and exit the program.
Information
≥
Use the FOMA phone with the dial-up setting completed for dial-up
connection. To connect another FOMA phone, you may need to
reinstall the FOMA communication setup files (driver).
≥
The power consumption of the FOMA phone increases during
communication.
≥
During packet communication, the communication state appears on the
FOMA phone.
“ ” (Communicating, data sending)
“ ” (Communicating, data receiving)
“ ” (Communicating, no data sending/receiving)
“ ” (Outgoing or being disconnected)
“ ” (Incoming or being disconnected)
≥
During 64K data communication, “ ” appears on the FOMA phone.
Disconnecting
Information
≥
The communication line may not be disconnected by only exiting the
browser software. To surely disconnect the communication line,
perform this operation.
≥
The baud rate displayed on your personal computer may be different
from the actual one.
Uninstalling FOMA PC Setup Software
Before Uninstalling