Panasonic Foma p705im, Instruction Manual

Page: 387 / 554

3 8 5
Ne
two
rk
Servi
ces
You can activate/deactivate the functions you selected in Arrival Call
Act and can check the setting contents.
1
m
1
Service
1
Set in-call arrival act
1
Do the following operations.
Answer If you have set “Call waiting” to “Activate” and receive a voice
call during a voice call, you can use “Call waiting”. Any of the
following operations is available during a voice call (when “Call
waiting” is set to “Deactivate”), during a videophone call, or
during 64K data communication.
≥
You can answer incoming voice calls, videophone calls, or
64K data communication after finishing the current voice call,
videophone call or 64K data communication.
≥
From the Function menu, you can manually operate voice
calls, videophone calls, or 64K data communication that
come in during a call.
≥
When “Voice mail” or “Call forwarding” is set to “Activate”,
your FOMA phone follows that setting.
Set In-call Arrival Act
Item Operation/Explanation
Item Operation/Explanation
Activate
1
YES
Deactivate
1
YES
Check setting You can check the setting contents of In-call Arrival Act.
Information
≥
You can set and confirm this setting from the FOMA phone with your own UIM
inserted. You cannot remote-control the setting from landline phones, public
phones, and other mobile phones.
You can set “Voice mail” or “Call forwarding” to be operated from
touch-tone landline phones, public phones, DoCoMo mobile phones,
or others.
≥
To use “Voice mail” or “Call forwarding” overseas, you need to set “Remote
control” to “Activate” in advance.
1 m
1
Service
1
Remote control
1
Do the following operations.
You can add and use the additional number 1 and 2 at maximum as
the phone numbers of your FOMA phone besides the basic number.
≥
When you remove or replace the UIM, the multi number settings (name, phone
number, etc.) stored in the FOMA phone might be erased. In this case, store them
again.
≥
The name that corresponds to each multi number (Basic Number/Additional
Number1/Additional Number2) appears on the Dialing display/Call Receiving
display.
≥
When you make a call from Redial, Dialed Calls, or Received Calls, the multi
number of the call you dialed/received at that time appears and is dialed.
Remote Control
Setting Remote Control
< >
Item Operation/Explanation
Activate
1
YES
Deactivate
1
YES
Check setting You can check the setting contents of Remote Control.
Information
≥
You can set and confirm this setting from the FOMA phone with your own UIM
inserted. You cannot remote-control the setting from landline phones, public
phones, and other mobile phones.
Multi Number
Setting Additional Number
< >