Panasonic Foma p705im, Instruction Manual

Page: 122 / 554

120
Securi
ty Sett
in
gs
For some functions of the FOMA phone, you need to enter your
password. In addition to the Terminal Security Code for operating
respective mobile phone functions, the Network Security Code to use
network services, and i-mode password are available. These
passwords help you utilize your FOMA phone.
The Terminal Security Code is set to “0000” at purchase but you can
change it by yourself. (See page 121)
When the display for entering the Terminal Security Code appears,
enter your four- to eight-digit code and press
O o
( ).
≥
When you enter your Terminal Security Code, the entered
numbers are indicated by “_” and not displayed.
≥
If you have entered wrong numbers or nothing for about
15 seconds, a warning tone sounds and a warning
message is displayed; then the display prior to entering
the Terminal Security Code returns. Check the correct
code and retry entering numbers.
Passwords
■ Cautions on passwords
≥
You should avoid using the numbers for passwords such as denoting your birth
date, part of your phone number, local address number, room number, “1111” or
“1234” that is easily decoded by a third party. Also make sure that you take a
note of the passwords you have selected just in case you forget them.
≥
Take care not to let others know your passwords. Even if your passwords are
known and used by a third party, we at DoCoMo take no responsibility in any
event for the resultant loss.
≥
Note that we at DoCoMo will never make any inquiries about your passwords.
≥
If you do not remember your respective passwords, you need to bring an
identification card such as your driver
’ s license, the FOMA phone and UIM to the
handling counter of a DoCoMo shop.
For details contact “DoCoMo Information Center” on the back page of this
manual.
Terminal Security Code
The Network Security Code is a four-digit number for procedures on
DoCoMo e-site or for using network services. This is determined at the
time of contract but can be changed by yourself.
If you have “DoCoMo ID/Password” for “My DoCoMo”, the overall
support site for personal computers, you can use a personal
computer to take proceedings of changing your Network Security
Code to new one. Also, you can change it by yourself from “
各種手続
き
(procedures)” on DoCoMo e-site by using the i-mode phone.
※ For “My DoCoMo” and “DoCoMo e-site ( ドコモ e サイト )”, see the
inside back cover of this manual.
You need to enter the four-digit “i-mode password” for registering or
deleting My Menu, applying for or canceling Message Services,
i-mode pay service, and so on.
(Some information providers may provide you with their specific
password.)
The i-mode password is “0000” at the time of your contract, but you
can change it by yourself. (See page 161)
From i-mode, you can change the i-mode password by following
operation:
“
i
Menu
”
→ “English iMenu” → “Options” → “Change i-mode
Password”
Network Security Code
i-mode Password