Panasonic Foma p705im, Instruction Manual

Page: 132 / 554

130
Securi
ty Sett
in
gs
1 m
1
Settings
1
Incoming call
1
Ring time
1
Do the following operations.
+ m - 9 - 0
Ring Time
Delaying Start of Ringing Operation
< >
Item Operation/Explanation
Ring start time You can set the FOMA phone not to start ringing operation
immediately for when a voice call or videophone call comes in
from the party whose phone number is not stored in the
Phonebook. This function is effective as a countermeasure for
blocking nuisance calls such as one ring phone scam
(one-giri).
1
ON or OFF
1
Enter a start time (seconds).
≥
Enter from “01” through “99” in two digits.
Missed calls
display You can set whether to display the call disconnected within the
time specified for “Ring start time” in Received Calls.
1
Display or Not display
Information
≥
When a call comes in from the party whose phone number is stored in the
Phonebook, the FOMA phone starts ringing as soon as the call comes in even if
“1
8 6” / “1 8 4” is added to the phone number. However, during Personal Data Lock,
or for the call from the party whose phone number is stored as secret data, ringing
starts according to the setting of this function.
≥
If the ring start time is longer than the ring time for Record Message Setting, the
ringing operations do not start, activating Record Message instead. To activate
Record Message after starting the ringing operations, set the longer ring time for
Record Message Setting than the ring start time. The same applies to the ring
time for Voice Mail Service, Call Forwarding Service, and Auto Answer Setting.
You can reject voice calls and videophone calls from the party whose
phone number is not stored in the Phonebook.
This function is valid only when the other party notifies his/her phone
number. It is advisable to activate “Caller ID request” and “Call setting
w/o ID” simultaneously.
1
m
1
Settings
1
Lock/Security
1
Reject unknown
1
Enter your Terminal Security Code
1
Accept or Reject
1 m
1
Settings
1
Videophone
1
Reject videophone
1
Enter your Terminal Security Code
1
ON or OFF
Reject Unknown
Rejecting Calls from Phone Numbers
which are not Stored in Phonebooks
< >
Information
≥
If a call comes in from the party whose phone number is stored as secret data, the
call is not rejected, regardless of this setting.
≥
If you simultaneously activate “Reject unknown” and “Call acceptance” of
“Restrictions”, the latter has priority.
≥
When a call comes in from anyone whose phone number is not stored in the
Phonebook while you set this function to “Reject”, the call is stored in “Received calls”
as a missed call record, and the “Missed call” icon appears on the Stand-by display.
Also, the caller hears a busy tone even if you have set Voice Mail Service or Call
Forwarding Service to “Activate”. However, if you set the ring time for Voice Mail
Service or Call Forwarding Service to 0 seconds, when the FOMA phone is out of the
service area, or when the power is turned off, the caller does not hear the busy tone
and Voice Mail Service or Call Forwarding Service works.
≥
Even when this function is set to “Reject”, your FOMA phone follows the settings
specified by “Call setting w/o ID” if each setting of “Call setting w/o ID” is set to “Accept”.
≥
You can receive SMS messages or i-mode mail regardless of this setting.
≥
You cannot set “Reject unknown” to “Reject” while “Ring start time” of “Ring time”
is set to “ON”.
Reject Videophone
Rejecting Incoming Videophone Calls
< >