Panasonic Foma p705im, Instruction Manual

Page: 152 / 554

150
Camera
2
Fit a code to be scanned to the guide
frame and press
X o
.
When the focus is locked, a confirmation tone sounds
and the cross mark becomes green.
≥
Press
i
( ) and select “Brightness”; then you
can adjust brightness to -3 (dark) t3 (bright).
≥
Press
C o
to show the reduced display, and press
V o
to return to the former display.
3
Press
O o
( ).
The code is scanned. (The shutter tone does not sound.)
≥
To cancel scanning, press
r
or
O o
( ).
≥
When scanning is completed, the scanning completion tone sounds and the
Call/Charging indicator lights. The sound level is fixed and cannot be
changed. However, the tone does not sound in Manner Mode or while
“Phone” of “Ring volume” is set to “Silent”.
≥
“ ” is displayed for melody files and “ ” or “ ” is displayed for
incompatible or damaged files.
≥
While you are entering (editing) characters, the Scanned Code Result display
does not appear; the Text Data Confirmation display of the scanned code
appears. To enter the scanned code, press
O o
( ). To discard it, press
l
( ) or
r
. The characters that cannot be displayed are replaced
by half-pitch spaces. When the code containing no text data has been
scanned, the code is not correctly displayed.
≥
If scanning is not completed in a certain period, the scanning is suspended
and the Scanning Code display returns.
≥
When the scanned code is part of divided QR codes, select “OK” to repeat
step 2 and step 3 for scanning the rest of codes.
4
i
( )
1
Save result
1
OK
The scanned data is stored.
Scanning Code
display
Scanned Code
Result display
Information
≥
You cannot scan bar codes or 2-dimensional codes other than JAN codes or QR
codes.
≥
Scanning may take a long time. Hold the FOMA phone securely with your hands
during scanning.
≥
You may not be able to scan codes correctly depending on scratch, dirt, damage,
the quality of printed material, light reflection, or QR code version.
≥
You cannot scan some codes depending on the type or size.
Function Menu of the Scanned Code Result Display
Function menu Operation/Explanation
Save result See page 150.
Display list You can bring up the Bar Code Reader List when one or more
files are stored.
Internet You can connect to the highlighted URL via i-mode or Full
Browser.
1
i-mode or Full Browser
1
YES
≥
You can connect to the URL also by highlighting the URL
and pressing
O o
( ).
Compose message You can compose an i-mode mail message to send to the
highlighted mail address. Go to step 3 on page 1
8 2.
≥
You can compose it also by highlighting the mail address
and pressing
O o
( ).
≥
When you select “Compose message” from the Scanned
Code Result display, the data on the Scanned Code Result
display is entered into the address, subject, and text field.