Panasonic Foma p705im, Instruction Manual

Page: 249 / 554

247
O
s
aif
u
-K
ei
tai/T
o
ruC
a
You can start the Osaifu-Keitai compatible i-
α
ppli from the Software
List or IC Card List. By using Osaifu-Keitai compatible i-
α
ppli, you can
read/write the data inside the IC card and use convenient functions
such as depositing electronic money or traffic tickets, or checking
your account for the balance and usage details on the mobile phone.
≥
Take care of your Terminal Security Code and password used for each service not
to reveal to anyone.
≥
When you start or download the Osaifu-Keitai compatible i-
α
ppli program for the
first time, the message “Use IC card for current UIM?” appears. When you select
“YES”, you cannot use the IC card function afterward unless you insert the same
UIM.
To use the IC card function with another UIM, insert the currently supported UIM
first and then deleted all the Osaifu-Keitai compatible i-
α
ppli programs. Otherwise,
you cannot use it.
≥
Reading and writing data from the software program and to the IC card is
suspended in the following cases:
In that case, the read or written data is discarded. The operation after the
communication ends differs depending on the service you use.
・ When a call comes in while i-
α
ppli is running
・ When the battery goes flat
1 i
(for at least one second)
1
Select an Osaifu-Keitai
compatible i-
α
ppli program.
The Osaifu-Keitai compatible i-
α
ppli program starts up.
Starting Osaifu-Keitai Compatible i-
α
ppli
Read and Write Data inside the IC Card
Place the FeliCa mark “ ” of the FOMA phone over the scanning
device, and you can use the FOMA phone as electronic money to pay
for shopping or to use it as a traffic ticket. This function is available
without starting the software program.
≥
During a call or i-mode connection, you can use Osaifu-Keitai by placing the FeliCa
mark over the scanning device, however, you cannot start the Osaifu-Keitai
compatible i-
α
ppli.
1
Place the FeliCa mark “ ” of the FOMA phone over
the scanning device to use the target service.
≥
The Call/Charging indicator lights when you bring your FOMA phone close to
a scanning device and communication becomes ready.
Use Osaifu-Keitai
Place the FeliCa mark
“
” of the FOMA phone
over the scanning device.
Information
≥
Mount the battery pack to use Osaifu-Keitai. Even when the power is turned off or
when the battery has gone flat, you can use Osaifu-Keitai by placing the FeliCa
mark over the scanning device, however, you cannot start the Osaifu-Keitai
compatible i-
α
ppli. You might not be able to use Osaifu-Keitai if you have left the
battery unused for a long period or not charged it after the low battery alarm
sounds. Charge the battery.
≥
When the FeliCa mark “ ” of the FOMA phone placed over the scanning device
is not identified, slightly move the mark forwards, backwards, to left, or to right.
≥
Osaifu-Keitai compatible i-
α
ppli might start when you place the FOMA phone over
the scanning device.