Panasonic Foma p705im, Instruction Manual

Page: 494 / 554

1
The data communication services you can use by
connecting the FOMA phone to a personal computer are
classified as follows: packet communication, 64K data
communication, and data transfer (OBEX
™
Communication).
The FOMA phone is equipped with the adapter function
for packet communication.
≥
To perform the packet communication overseas, perform it via the IP
connection. (You cannot perform the packet communication via the
PPP connection.)
≥
64K data communication is not available overseas.
You can exchange data files such as images, music files,
Phonebook entries and mail messages with another FOMA
phone or a personal computer.
This service requires a communication fee according to the
amount of data you sent and received. (Maximum download
speed: 3.6 Mbps, Maximum upload speed: 384 kbps)
It uses an access point which supports FOMA packet
communication such as DoCoMo Internet access service
“mopera U”/“mopera”.
To use this service, connect the FOMA phone to a personal
computer via the FOMA USB Cable with Charge Function 01
(option), and then carry out settings. The packet
communication is suitable for using applications which
require the high-speed communication.
To carry out the settings and connection, see page 4 and
after.
≥
The packet communication is charged according to the amount of data
you sent and received. Note that you are charged a high communication
fee for the massive data communication such as browsing Internet web
pages having many images or downloading data files.
≥
The data is sent/received at the maximum speed of 384 kbps outside
the FOMA High-speed Area.
≥
When you use the packet communication with “sigmarion III”,
“sigmarion II”, or “musea” of DoCoMo’s PDA, the data is sent/
received at the maximum speed of 384 kbps. High-speed
communication for FOMA High-speed Area is not supported.
Data Communication Available from
FOMA Phone
Data Transfer (OBEX
™
Communication)
Packet Communication
Infrared data exchange
iC communication
FOMA USB Cable with Charge Function 01
microSD memory card
DoCoMo keitai datalink
This FOMA
phone
This FOMA
phone
This service requires a communication fee according to the
duration of connection. By connecting the FOMA phone to
a personal computer via the FOMA USB Cable with Charge
Function 01 (option), you can execute communication.
To use this service, connect to an access point which
supports FOMA 64K data communication such as DoCoMo
Internet access service “mopera U”/“mopera”, or an ISDN-
synchronous 64K access point.
To carry out the settings and connection, see page 4 and
after.
≥
The 64K data communication is charged according to the duration of
connection. Note that a communication fee becomes expensive if
you use this service for a long time.
To use the Internet, you need to pay the charge for the
Internet service provider you use. Besides the FOMA
service fee, you need to directly pay this charge to the
Internet service provider. For details on the charge,
contact the Internet service provider you use.
You can use the DoCoMo Internet access service,
“mopera U”/“mopera”. To use “mopera U”, subscription
(charged) is required. To use “mopera”, subscription
and monthly charge are not required. However, the
maximum communication speed of sending/receiving
data is limited to 384 kbps.
64K Data Communication
Information
≥
The FOMA phone does not support Remote Wakeup.
≥
The FOMA phone does not support the FAX communication.
≥
You can perform data communications by connecting the FOMA phone
with DoCoMo’s PDA “sigmarion ll”, “sigmarion lll”, or “musea”.
When you use “sigmarion ll” or “musea”, the update is required. For
details such as how to update them, refer to the DoCoMo web page.
Before Using
Charge of Internet service provider