Panasonic Foma p705im, Instruction Manual

Page: 514 / 554

21
1
“
スタート
(Start)”
1
“
設定
(Setting)”
1
Open
“
コントロールパネル
(Control panel)”.
2
Open “ 電話とモデムのオプション (Phone and
modem options)” in “ コントロールパネル
(Control panel)”.
3
If the “
所在地情報
(Address information)”
display appears, enter “
市外局番
(City code)”,
then click “OK”.
4
Open the “ モデム (Modem)” tab, confirm the
COM port number in the “ 接続先 (Access
point)” field of “FOMA P705i
μ
” or
“PROSOLID
μ
”, then click “OK”.
≥
The COM port number you confirmed is used to set an access
point name (APN) (see page 21).
≥
The contents on the property display and COM port number vary
depending on the personal computer you use.
For Windows 2000
The operation below explains how to set an access
point name (APN) for packet communication. You can
register up to 10 access point names (APNs), which are
managed with cid1 to cid10 (see page 22).
When using “mopera U” or “mopera”, you do not need
to set the access point name (APN).
The operation below is the example where you use
“XXX.abc” as the access point name (APN) and use the
FOMA USB Cable with Charge Function 01 (option). For
the actual access point name (APN), contact your
Internet service provider or network administrator.
The setting here will be the access point number for
dial-up network setting (see page 23).
1
Connect the FOMA USB Cable with Charge
Function 01 to the FOMA phone.
2
Turn on the power to the FOMA phone, then
connect the FOMA USB Cable with Charge
Function 01, which is already connected to
the FOMA phone, to the personal computer.
3
Start Hyper Terminal.
“ スタート (Start)” → “ すべてのプログラム (All programs)” → “ アクセ
サリ (Accessories)” → “ 通信 (Communications)” → Open “ ハイパー
ターミナル
(Hyper Terminal)”.
After starting Hyper Terminal, when the message “ 『既定の Telnet 』
プログラムにしますか? (Select the specified Telnet program?)” is
displayed, set as desired. Contact the maker of your personal
computer and Microsoft Corporation for the setting contents.
≥
For Windows 2000, “ スタート (Start)” → “ プログラム (Programs)”
→ “ アクセサリ (Accessories)” → “ 通信 (Communications)” → Open “
ハイパーターミナル
(Hyper Terminal)”.
4
Enter any name in the “
名前
(Name)” field,
then click “OK”.
Here, “Sample” is entered as an example.
Set an Access Point Name (APN)
For Windows XP