Panasonic FA-DS72 Service Manual & Parts Manual Download Page 52

Page: 52 / 402

4-12

Replacement of the paper feed roller and the Pick-up roller

1) Remove the right cover and rear cover.

2) Open the copier paper feed cover.

3) Remove the paper feed cover stopper.

Note: Move the stopper to the larger hole

and remove.

1) Disconnect the harness of the paper feed

unit.

2) Remove the paper feed unit (4 screws).

1) Remove the touch ring.

2) Remove paper feed roller.

3) Remove the bracket guide.

4) Remove the the pick-up roller.

Note: Confirm the direction of the rollers

before the installation.

Summary of Contents for FA-DS72



















































































































































































































































































































































































































Search results

Summary of Contents for FA-DS72

Reviews:

Related manuals for FA-DS72

Brands by name

Popular brands

Panasonic FA-DS72, Service Manual & Parts Manual

Search results

Summary of Contents for FA-DS72

Reviews:

Related manuals for FA-DS72

Brands by name

Popular brands