Panasonic FA-DS72 Service Manual & Parts Manual Download Page 334

Page: 334 / 402

5-2

(b) U11:Sorter paper trouble

Paper is in the sort bin when the staple sort mode or sort mode is selected.

• More than 50(30/Ledger, A3) copies are received by the sort bin.

• Sheets of paper of different width or sizes unsuitable for stapling(invoice,etc.)

are received.

"U11" is cleared when all the copies in the sort bin are removed.

(a) U4:Sorter failure

When the sorter is not installed correctly.

Is the sorter installed correctly?

• Install the sorter correctly

Does the input of the connector (J7-

1:S620/J3-1:S660) change when

the door switch is turned ON/OFF?

• Door switch improper fitting or

failure

YES

(d) Staple cartridge is not detected

Under the following conditions, copies won't be stapled:

• Pressing the manual staple key

• Selecting the staple sort mode

Note: The "Add staple" indication is an alarm. All functions other than stapling

are normal.

When the staple unit cover is not closed completely.

Is the cover opened?

• Close the cover.

Does the output from YJ6-2

( S P L O P N ) c h a n g e w h e n

opening and closing the cover?

YES

• Stapler unit cover switch

failure.

Summary of Contents for FA-DS72



















































































































































































































































































































































































































Search results

Summary of Contents for FA-DS72

Reviews:

Related manuals for FA-DS72

Brands by name

Popular brands

Panasonic FA-DS72, Service Manual & Parts Manual

Search results

Summary of Contents for FA-DS72

Reviews:

Related manuals for FA-DS72

Brands by name

Popular brands