Panasonic FA-DS72 Service Manual & Parts Manual Download Page 112

Page: 112 / 402

5-35

Troubleshooting

Error
code

Message

Item

See page

SORTER FULL-EMPTY

If too many copies in bin or

4-37

PRESS MODE KEY

too many bins selected.

Remove copies and press the

each sorter mode key on the

touch panel.

Not ready (Red LED flashes)

Power saving

----------

The ready indicator will light

and the other displays are

turned OFF.

To clear the Stand-by

mode, press the Print key.

Not ready (Red LED lights)

Auto off

----------

The ready indicator will flash

and the other displays are

turned OFF.

To clear the Power saving

mode, press the Print key.

Summary of Contents for FA-DS72



















































































































































































































































































































































































































Search results

Summary of Contents for FA-DS72

Reviews:

Related manuals for FA-DS72

Brands by name

Popular brands

Panasonic FA-DS72, Service Manual & Parts Manual

Search results

Summary of Contents for FA-DS72

Reviews:

Related manuals for FA-DS72

Brands by name

Popular brands