Panasonic FA-DS72 Service Manual & Parts Manual Download Page 73

Page: 73 / 402

Preventive

Maintenance

4-33

Replacement of the paper feed roller/storage roller/F/R mylar/feed roller pad

(1) Remove the screws (x 2).

(2) Remove the stopper plate.

(3) Remove the touch rings from the guide

plates.

(4) Disconnect the feed clutch connector.

(5) Remove the touch rings (x2).

(6) Move the bearing toward the feed rollers.

(7) Remove the paper feed roller shaft.

(1) Pull out the ADU until it stops.

(2) Remove the upper cover (2 screws).

(3) Lift the transport guides (1 and 2).

(1) Remove the touch ring.

(2) Remove all rollers by pulling in the arrow

direction.

(3) Replace the paper feed roller.

(4) Replace the storage rollers.

• Take off the F/R mylar (kit) and replace it.

Note: Perform step 7 first.

Summary of Contents for FA-DS72



















































































































































































































































































































































































































Search results

Summary of Contents for FA-DS72

Reviews:

Related manuals for FA-DS72

Brands by name

Popular brands

Panasonic FA-DS72, Service Manual & Parts Manual

Search results

Summary of Contents for FA-DS72

Reviews:

Related manuals for FA-DS72

Brands by name

Popular brands