Panasonic FA-DS72 Service Manual & Parts Manual Download Page 91

Page: 91 / 402

5-14

Code Item

Function

Paper feed motor forward rotation

The motor rotates forward.

(FA-A888)

Paper feed motor reverse rotation

The motor rotates reverse.

(FA-A888)

(High speed)

Paper feed motor reverse rotation

The motor rotates reverse.

(FA-A888)

(Middle speed)

Paper feed motor reverse rotation

The motor rotates reverse.

(FA-A888)

(Low speed)

Paper reverse/exit motor forward

The motor rotates forward.

rotation (FA-A888)

(High speed)

Paper reverse/exit motor forward

The motor rotates forward.

rotation (FA-A888)

(Middle speed)

Paper reverse/exit motor forward

The motor rotates forward.

rotation (FA-A888)

(Low speed)

Wait plate and paper feed

The solenoid operates.

solenoid (FA-A888/FA-A505)

Reverse solenoid (FA-A888)

The solenoid operates.

Not used

Transport/paper feed motor

The motor rotates.

(Sorter)

Bin movement for down direction

The #20 bin position moves forward

(Sorter)

#1 bin position.

Bin movement for up direction

The #1 bin position moves forward

(Sorter)

#20 bin position.

Tamper drive motor

The tamper moves to staple minimum size and return

(only Staple Sorter)

to the original position

Staple motor

The stapler operates one time then resets.

(only Staple Sorter)

Summary of Contents for FA-DS72



















































































































































































































































































































































































































Search results

Summary of Contents for FA-DS72

Reviews:

Related manuals for FA-DS72

Brands by name

Popular brands

Panasonic FA-DS72, Service Manual & Parts Manual

Search results

Summary of Contents for FA-DS72

Reviews:

Related manuals for FA-DS72

Brands by name

Popular brands