Panasonic DP-1510P, Service Manual

Page: 366 / 486

366
APR 2002
Edition 2.0
DP-1510P/1810P
/1810F/2010E
(4) Remove 7 Screws.
(5) Remove the Rear Plate.
(6) Bend the protective Tab on the Rear Plate further
than 90
°
as illustrated on the left.
(7) Connect the Harness to CN3 on the SC PC
Board.
(8) Insert the Harness Clamp into a pre-drilled hole
in the frame (from underside).
Note:
Do not cut the Harness Clamp (Tie-Wrap) when
servicing. Push the release clip on the side to
remove it.
(9) Re-install the Rear Plate.
(10) Secure the Rear Plate with 7 Screws removed in
step (4).
Note:
Align the ADF if required by following the steps
below.
(A) Release the 4 Screws.
(B) Adjust the right side of the ADF and the ADF
Mounting Bracket as illustrated on the left.
(C) Secure the 4 Screws.
(4)
(5)
(6)
(7)
(8)
(10)
(9)