Panasonic DP-1510P, Service Manual

Page: 247 / 486

247
DP-1510P/1810P
/1810F/2010E
APR 2002
Edition 2.0
4.9.3. Error Message appears on the PC
4.9.4. Error Message appears on the Unit
4.9.5. System Error (CD drive related error during installation)
Error Message Solutions
Network Print DLL Error. • Check if the Panasonic Device is turned "On" and the 10Base-T/
is 100Base-TX cable properly connected.
• Printer Properties may be incorrectly configured. (i.e. Printer Port)
Network Port is Busy. • The Panasonic Device may be processing someone’s print job,
please wait and try again later.
• The Panafax facsimile unit is either Transmitting or Receiving an email.
Cannot print because an error is
found in the current printer
setting. • Verify and specify the paper size or orientation to coincide with the
application and the printer driver settings.
Error Message Solutions
• The available Sort Memory in the Panasonic Device may not be
enough.
Either install an optional Sort Memory or change the
resolution to 300 dpi in the Printer Driver Properties dialog box.
• The print condition may not be matched for the system.
Change the printing condition in the Printer Driver Properties
dialog box.
i.e. Multi-sized printing with stapling order.
Cannot complete print job
Image memory overflow
Cannot print
System error
Can not complete
Confirm print condition
• Change the resolution to 300 dpi in the Printer Driver properties
dialog box.
Problem Solutions
Can not read the drive. • Insert the CD into the drive and click “Retry”.