Panasonic DP-1510P, Service Manual

Page: 279 / 486

279
DP-1510P/1810P
/1810F/2010E
APR 2002
Edition 2.0
087 DARKER LEVEL 0 = Lightest Contrast
~
15 = Darkest Contrast
Selects the contrast level.
0
← →
15
Lightest
← →
Darkest
088 NORMAL
LEVEL
089 LIGHTER
LEVEL
090
091 Not Used
092 SMOOTHING 1 = Off
2 = On Selects whether the smoothing function is available.
093
~
109
Not Used
110 MAC ADDRESS Indicates the MAC Address.
111 LAN I/F ROM
VER
Indicates the LAN I/F Firmware version.
112 INSERT EMAIL
TXT
1 = Off
2 = On Selects whether the Text Template (email message)
is programmable and added on all email sent in the
message body above the top line of text. (Up to 40
characters Programmed in the User Parameters.)
Note:
After enabling this feature, aside from entering
the text in the User Parameters, it also has to be
activated in each Auto Dial Number before it will
take effect. It does not work for Direct Dialed
Numbers.
113 Not Used
114 SYMBOL SET 1 = Standard
2 = Extended Selects whether the extended symbols other than
"%" is available for Internet Parameters entry.
115 TIME ZONE 1 = Scroll
2 = Direct Selects the setting method for Time Zone.
Scroll
: Allows using "Scroll Keys" to scroll through
the Time Zone Table.
Direct : Allows you to input the Time Zone directly,
(*) key to be used as a switch b/-.
116 OVERWRITE
WARNING
1 = Yes
2 = No Selects whether the Overwrite Warning is included
on the Internet FAX Result Receipt when
programming the Auto Dialer via email.
117
~
129
Not Used
130 BUSY-ACK
TIMING
• In Busy
• After Busy
• While Busy Selects the signal timing between the BUSY and
ACK signal in Printer Interface Mode.
131 CMD RCV GRD
TIMER
1 min.
~
15 min. Selects the Guard Timer between each GDI
Command in Printer Interface Mode.
132 PRT DATA
TIMER
1 min.
~
15 min. Selects the Guard Timer between each GDI Data
Frame in Printer Interface Mode.
133
~
134
Not Used
Function Parameter Table
No. Parameter Selections Function