Panasonic DP-1510P Page 78 Service Manual Download

Page: 78 / 486

APR 2002

Edition 2.0

DP-1510P/1810P

/1810F/2010E

2.2.16.

Process Unit

(1) Open the Right Cover.
(2) Open the Front Door Cover.
(3) Remove the Toner Waste Container by slowly

pulling it towards the left as illustrated.

(4) Seal the Container with the enclosed cap and

dispose of it properly.

(5) Lift the Release Latch (White) and remove the

Process Unit.

(6) Open the bottom Leg as illustrated.

(7) Release 2 OPC Latches (1044, 1045) and turn

the OPC Drum Assembly in the direction of the
arrow.

(3)

(2)

(4)

(1)

(5)

(6)

(7)

Summary of Contents for DP-1510P







































































































































































































































































































































































































































































































Search results

Summary of Contents for DP-1510P

Reviews:

Related manuals for DP-1510P

Brands by name

Popular brands

Panasonic DP-1510P, Service Manual

Search results

Summary of Contents for DP-1510P

Reviews:

Related manuals for DP-1510P

Brands by name

Popular brands