Panasonic DP-1510P Service Manual Download

Page: 384 / 486

384

APR 2002

Edition 2.0

DP-1510P/1810P

/1810F/2010E

8.6.5.

Installing the 2nd, 3rd and 4th Paper Feed Modules Together for DP-1810F/2010E
(Except DP-2010E for USA and Canada)

Note:

Turn the Power Switch to the OFF (O) position and unplug the AC Power Cord before
beginning installation.

(1) Slide the Paper Tray all the way out.

(2) Remove 7 Silver Screws.
(3) Remove the Rear Plate.

(4) Remove 2 Silver Screws

(2nd Paper Feed Module).

(5) Remove the CST Rear Cover.

(6) Remove 1 Screw.
(7) Remove the Drive Cover 2 Bracket.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

Summary of Contents for DP-1510P







































































































































































































































































































































































































































































































Search results

Summary of Contents for DP-1510P

Reviews:

Related manuals for DP-1510P

Brands by name

Popular brands

Panasonic DP-1510P, Service Manual

Search results

Summary of Contents for DP-1510P

Reviews:

Related manuals for DP-1510P

Brands by name

Popular brands