Panasonic DP-1510P, Service Manual

Page: 273 / 486

273
DP-1510P/1810P
/1810F/2010E
APR 2002
Edition 2.0
5.2.2. Service Mode 1 (Function Parameter Setting)
Use the following procedure to change the function parameters.
Note:
The following buttons provide these functions in the Service Mode:
Service Mode 1 : For DP-1810F
Step Operation or Unit Condition LCD Display
1 Standby
2 Press “FUNCTION” and then “7”.
3 Press “MONITOR” four times, then press “*”.
4 Press “1”.
5 Enter the Function Parameter Number or press “V” or
“/\ “ to select the desired parameter.
Ex: Changing the "ALARM STATUS" -- Enter "001"
and press [SET].
6 Press “START”.
7 Enter the new setting value. Ex: Enter "3" for Constant.
8 Press “START”. The new value will be stored and the
next parameter will be displayed.
9 Repeat steps 4 through 7 to change other Function
Parameters or Press “STOP” twice to return to
standby.
"START": : The new setting value is stored in the machine.
"V” : Scroll the function parameter number down.
"/\ “ : Scroll the function parameter number up.
MMM-dd-yyyy 15:00
00%
SET MODE (1-4)
ENTER NO. OR V
SERVICE MODE
ENTER NO. OR V
PARAMETER (000-299)
ENTER PARAMETER #_
PARAMETER #001
ALARM STATUS?
ALARM STATUS:Timer
1:OFF 2:Tmr 3:CONST
ALARM STATUS:Const.
1:OFF 2:Tmr 3:CONST
PARAMETER #002
STOP COMM.JRNL?
MMM-dd-yyyy 15:00
00%