Panasonic DP-1510P, Service Manual

Page: 238 / 486

238
APR 2002
Edition 2.0
DP-1510P/1810P
/1810F/2010E
725 XMT
POP LAN DNS Server connection timed out. Incorrect DNS Server address is set.
DNS Server is down.
726 XMT
POP LAN Received an error response from
the DNS Server. Incorrect POP Server address is set.
Incorrect SMTP Server address is set.
730 RCV LAN Unable to program the Internet
parameters or the autodialer with
Email from a PC. Verify that the Fax Parameter #158 is
set to 2: Valid.
731 RCV LAN Dialer full while Relayed
Transmission Request was
received. Dial buffer for manual number dialing
(70 stations) are being used.
741 XMT, Polling Unable to dial Deleted the registered station name
before dialing with Timer Controlled
Communications, etc.
800 Relay
Comm.
The machine was requested to
relay a document but has no Relay
Hub capability.
814 Conf. XMT
Conf. Polling
Relay
Comm.
The remote station does not have
Relay XMT nor Confidential
Communication capability.
815 Conf. RCV Mailbox is full.
816 Conf. Polled The received Polling Password did
not match.
825 Conf. RCV
Conf. Polled
Parameter settings of the remote
station are not properly set.
870 MEM XMT
Multi-Copy
Memory overflow occurred while
storing documents into memory.
879 Memory
RCV
PSTN Memory overflow occurred during
substitute memory reception.
LAN Memory overflow.
Mail Server sent a reset command
while downloading the data to the
machine. Memory overflow on the Fax side.
Mail server aborted the download (Busy
with other higher priority jobs).
880 - - File Access Error.
884 - - File Access Error.
961 RCV LAN Memory file access error. SC PCB is defective.
962 XMT PSTN Memory file access error. SC PCB is defective.
LAN Memory file access error. SC PCB is defective.
Fax Information Codes
Code Mode Phase Description of Problem Cause