Panasonic DP-1510P, Service Manual

Page: 277 / 486

277
DP-1510P/1810P
/1810F/2010E
APR 2002
Edition 2.0
048
049 Not Used
050 RING DETECT
MODE
1 = Normal
2 = Rough Selects the quality of ringer detection. Use if the line
signal is out of regulation, set to "Rough" so that the
unit may detect the ringing signals.
051 Not Used
052 PULSE RATE 1 = 10 pps
2 = 20 pps Selects the dial pulse rate 10/20 pps.
053
054 Not Used
055 BUSY TONE
CHECK
1 = Off
2 = On Selects whether to detect the Busy Tone.
056 DIAL TONE
CHECK
(Except for USA
and Canada)
1 = Off
2 = On Selects whether to detect dial tone before dialing the
telephone number.
057 DC LOOP
CHECK
(Except for USA
and Canada)
1 = Off (will not check)
2 = On (checks) Selects whether the unit checks the DC Loop during
communication.
058 COMM.JRNL
+IMAGE
1 = Off (without image)
2 = On (with image) Selects whether the machine prints the COMM.
Journal with image.
059 CONFIDENTIAL
RCV REPORT
1 = Off (does not print out)
2 = On (prints out) Selects whether the machine prints the Confidential
RCV Report.
060 VERSION Indicates the Host software
version.
061 TX/RX//PRT/
CPY COUNTER
TX/RX/PRT/CPY Displays the transmitted, received, total printed and
copied document count.
062 PRINT
COUNTER
1 = Off
2 = On Selects whether to print in the Fax Parameter List,
the counter information that is displayed in the
Function Parameter No. 61.
063
~
067
Not Used
068 NYSE FAX
FORWARD
(USA and
Canada Only)
1 = Off
2 = On Selects whether the machine will forward the
incoming and outgoing faxes to a specified station.
Note:
Once this parameter is activated, Fax Forwarding
via Fax Parameter 054 is automatically disabled,
an Access Code of "0000" is automatically
assigned and Fax Parameter 038 has a new
setting added called "NYSE".
069 NYSE LOCAL
PRINT
(USA and
Canada Only)
1 = INC
2 = ON (Always) Selects the printing condition for the incoming faxes
after FAX Forwarding.
INC. : Prints only if FAX Forwarding fails.
ON
: Always prints.
Function Parameter Table
No. Parameter Selections Function