Panasonic DP-1510P, Service Manual

Page: 372 / 486

372
APR 2002
Edition 2.0
DP-1510P/1810P
/1810F/2010E
(8) Install the i-ADF on top of the ADF Mounting
Brackets.
Note:
a. Set the i-ADF in the direction of the arrow.
b. Align the hallmark on the right side of the
Hinge Base and the ADF Mounting Bracket as
illustrated.
(9) Tighten the 2 Thumb Screws (DZPA000064).
(10) Secure the Automatic Document Feeder with 2
Silver Screws (XSN4+W10FN).
(11) Install 1 Screw (XTB3+8J) on the back of the left
ADF Mounting Bracket from the bottom as
illustrated.
(12) Remove 7 Screws.
(13) Remove the Rear Plate.
(14) Bend the protective Tab on the Rear Plate further
than 90
°
as illustrated.
(15) Connect the i-ADF Harness to CN3 on the SC
PC Board.
(16) Insert the Harness Clamp into the pre-drilled
hole in the frame (from underneath).
Note:
Do not cut the Harness Clamp (Tie-Wrap) when
servicing. Push the release clip on the side of the
clamp to remove it.
(17) Before proceeding, install the other options first.
If finished, close the i-ADF.
(18) Re-install the Rear Plate.
(19) Secure the Rear Plate with 7 Screws removed in
step (12).
(8)
(11)
(9)
(10)
(12)
(13)
(14)
(15)
(16)
(19)
(18)