Panasonic DP-1510P, Service Manual

Page: 270 / 486

270
APR 2002
Edition 2.0
DP-1510P/1810P
/1810F/2010E
5.1.8. F9 Mode: System Maintenance
Set the machine to Service Mode and press "9" on the Keypad.
↓
Press the “START” key.
↓
Select the desired code number on the Control Panel.
↓
If you wish to select another code number, scroll the menu with the arrow keys (
↑ ↓
).
↓
Select the desired function on the Control Panel and press the “START” key.
↓
When the “CANCEL” key is pressed, the selected setting inputted will not be accepted.
↓
Press the “FUNCTION” and “CLEAR” keys simultaneously to exit the Service Mode.
F9 Mode
Service
Mode
Item Function
F9 Unit
Maintenance 00 Fax Function Parameters
01 Service Alert Tel # Displays the contact number when a
machine malfunction occurs.
02 Firmware
Version
00 Host Displays the firmware version for host.
02 Scanner Displays the firmware version for scanner.
03 Printer Displays the firmware version for printer.
05 Printer Board (PDL) Displays the firmware version for PDL.
06 LAN Board Displays the firmware version for LAN.
03 Print
Device Info.
00 F5/F6 Parameters Prints the memory contents of the F5 and
F6 modes.
01 Machine Info. Prints the printer report.
02 Counter Information Prints the counter information.
03 System Addr. Info. Prints the system memory setting.
04 RAM Addr. Info. Prints the RAM data dump list.
04 RAM Edit Mode Factory use only.
05 Not Used
06 RAM
Initialize
00 Parameter Initialize Resets the Fax and Function parameters
to default values.
01 All Job Clear Clears all Jobs stored in Flash Memory.
02 LBP Error Log Clear Clears the Printer Error Log.
03 Shipment Set Clears All Jobs, All Preset Data,
Parameter Initialize & Resets the
Counters.
04 LBP Fuser Reset Clears the LBP fuser error.