Panasonic DP-1510P, Service Manual

Page: 394 / 486

394
APR 2002
Edition 2.0
DP-1510P/1810P
/1810F/2010E
8.8.2. Installation
Note:
Turn the Power Switch to the OFF (O) position and unplug the AC Power Cord before
beginning installation.
(1) Remove the Process Unit.
(Refer to ch 2.2.1 of the Service Manual)
(2) Remove the Front Cover, Inner Cover J, Left
Side Cover and Rear Plate.
(Refer to ch 2.2.3. of the Service Manual)
(3) Remove the LSU, LVPS Plate Assembly, Fan,
Upper and Lower Fan Bracket.
(Refer to ch 2.2.6. of the Service Manual)
(4) Remove the Glass L Assembly.
(Refer to ch 2.2.5. of the Service Manual)
(5) Remove 2 Screws.
(6) Remove the CCD Cover.
(7) Mount the RLB PC Board onto the RLB Bracket
as illustrated.
(8) Secure the RLB PC Board with 1 Screw.
(9) Install the RLB PC Board Assembly.
(10) Secure the RLB PC Board Assembly with 2
Screws.
(11) Connect the PTC-AC Harness 1 to CN171 on
the RLB PC Board and to CN736 on the HTC
PC Board.
(5)
(6)
(7)
(8)
(9)
(10)
(11)